Late 1980s – early 1990s Ranger(ish) reconnaissance photoshoot

A while back I did a photoshoot with the theme of old school reconnaissance. Here are some of the images that came out that day. For more, please head out to my Facebook page. Link below. In addition, please check out my Instagram and Youtube sites as well and like and subscribe!

Facebook
Instagram – hkins_blackberet
Youtube

Click on the images to view the full sized version.

Advertisements

Nuprol BOCCA 12″ Rail System – Review

A while ago I made a video about the Nuprol BOCCA 12″ Rail System that I bought from Gunfire. Now that I have had a chance to play with the rail, I have released another video about it. The first video concentrated on the installation of the rail to my G&P upper receiver and the second video is a follow-up video of the small issues that I have faced with the rail since I have been using it. Both videos are available at my Youtube channel or you can view them straight from this post as well, just look below.

The outer finish is bronze or brown and it mimics the Daniel Defense rails that Madbull also makes. This rail does not have the real marking on it, thus having a little more affordable prize tag. The construction is aluminum and the rail feels really sturdy when handling it.

The installation was a real pain. To get the rail to fit to my G&P upper receiver I had to do a lot of filing and re-threading to make it sit and attach properly. While I was researching this, I found mentions that this rail will fit WE, G&G and small modification required with ICS replicas. G&P, at least the upper receiver that I had, required quite a bit of modification before installation was complete. With the mods though, the rail sits very well with the upper receiver without any wobble or play between the parts.

I also encountered some problems with accessories. While I was visiting Milgear, an airsoft store located in Oulu, we tried on several different rail covers for the rail. The only one that fit, with minor modification, was a DBoys modular rail cover, that you can see on the second video. The Eotech and AFG attach without any problems, as their attachment system is different from the Dboys rails. The rails attach with sliding them in place and attaching the last part, which has a small lever that locks the covers in place. The lever attaches to one of the grooves on the rail. These grooves seem to have their own specifications that are different from other rail brands. Nuprol makes their own rail covers as well, but I have not tried them. You would assume that they fit to the rails without problems. Other rail covers from different manufacturers seemed to have some problems and required slight modification when attaching them.

The rail has held up really well in use. I have been using it for a little over  a month now and there are no signs of it failing. All in all, I am really happy with the purchase. Although the installation was difficult, it “brought me closer” to the rail and I like it even more having spent a lot of time installing it. Below are the two videos I have made about the rail. Take a look at them and place, like and subscribe to the Youtube channel. It helps me out a lot!

The Lawmaker – Berget BAVS launcher

I have made yet another video for the YouTube channel. This time I am talking a bit more about the LAW launcher that I use at Berget games. It is an inert LAW which has been fitted with the Berget Anti-Vehicle System, or BAVS. It is custom made by Berget Events and it functions really close if not completely like its real world counterpart. It is one of those things that can bring something a little extra to games. On the video I am talking more about how it works. I love the system and as a milsim player it is an excellent addition to my equipment.

M653 and M727 carbines

Earlier this week I uploaded a new video to my Youtube channel. On the video I am talking about my two AEGs that I have, the M653 and the M727. It is not an in depth video about the two different carbines but rather an overview of them. I do point out the most obvious differences between these rifles on the video.

The M653 was an “as is” purchase from a local airsoft retailer here in Finland. I have done some small upgrades to the replica along the way, most notably the hop up. It’s a G&P and from what I have learned from them, the hop up is something that needs to be changed right off the bat to get better results. The replica will shoot, but shot consistency when taking range and accuracy into account will be a lot better when you change the hop up. On the M653 I have a Prowin rotary hopup and a Madbull hop up bucking. These work really well and the replica shoots better than it did out of the box. Some small internal tuning has also been done to it, but nothing ground breaking. Just enough to make it run smooth and be reliable.

The M727 on the other hand is not an “as is” purchase. The receiver is G&P as well as some of the other parts on the replica, but I also used random parts that I had around when building it. There were some G&P made M727 carbines for sale at an airsoft retailer online, but they were all out of stock at the time when I was looking at them. Nevertheless, making something yourself will make you have a deeper bond to it, right? It took me a while to source all the parts for the replica but when I finally finished it, I was using it in almost every game I went to. It has been my main replica for a long time now. There is just something cool about this specific carbine that pleases me aesthetically.

Here is a link to the video on my Youtube channel. I have another video on the pipeline as well and it should be released in the next few days. Stay tuned, like and subscribe!

New video – ALICE setup

Yesterday I uploaded a new video to the Youtube channel. I’m talking a little about the current ALICE setup that I run and the modifications that I have done to it. A lot of the modifications, if not all, are taken from images, videos and books that I have read about old school gear that the US Military used back in the 1980’s and early 1990’s. Check the video out, leave a comment and subscribe!

Berget 13 kit – How it really went down

Even the best laid plans have a tendency to change when the first BB flies in the air. I earlier posted an article about the kit I was going to run at Berget 13. I had a dry-run with the kit at the reconnaissance training we attended with our team and noticed that while it was an excellent piece of kit, it was rather cumbersome with the drills we had to run. While comfortable and able to carry much on me, it was pointed out by our instructors (guys who do know what they are talking about, let’s just leave it at that) that the best rig for a reconnaissance trooper in their mind was a chestrig, belt and a rucksack. With this in mind, I change the LBV-E I had to a ALICE harness. Why? Well it was lighter and I still could carry the stuff I needed with me plus have my ALICE ruck on my back. Thinking that this would be the shit, I had a few dry runs at weekend games with the said kit and saw that it worked well. For weekend games at least. That previous sentence is important, remember it.

While I was finally packing for Berget and setting up some final stuff for the ALICE harness, I saw my SDS RACK (Ranger Carry Kit, as far as I am aware) in the corner. I’d bought this from a good friend who works at a local airsoft store near my hometown. I saw him carry one in 2014 at Blood Valley Chronicles airsoft event and it looked very comfortable and able to carry the essentials you needed in the field. I had gotten it with the main RACK plus three SDS R.A.C.K M4 Double Magazine pouches. I added some pouches from my Safariland ELCS kit to it and took it with me, just in case. I packed my other stuff and left them to wait for the trip to Berget.

As the hours towards game start were slowly disappearing from our watches, I did some final packing of my gear. We heard that we did not need our rucksacks, as we would be coming back to the camp to sleep or they could be dropped to us by our mechanized unit. We had anticipated as much and prepared for that. One team from our outfit stayed near the enemy base for the duration of the game and my hat goes off to these guys. Very hardcore shit guys, very hardcore! As I changed some stuff on my kit and packed my buttpack I started to notice that maybe this was not as good of an idea after all. While I like the ALICE harness at weekend games, with the thin strap foaming and the amount of stuff we needed to carry, it might get uncomfortable. Had it had more padding, it might have made a difference, or it might have not. Who knows? We head out and after 6 hours of wearing the damn thing fully loaded, my right should cramps at the in-game village we were then stopping at. The pain was a real motherfucker, as I had never had anything like that happen to me before. Noticing the looks the guys were giving me, I started limping as well (just for a laugh) and made a remark about Quasimodo from The Hunchback of Notre-Dame. Everyone started laughing with me. I convinced the guys I could still hold my weapon and we headed back to our camp as per orders from HQ. On the way we went through CP2 and run into about 10 GCT soldiers. Our sniper takes one guard out with one shot, for which the GCT player later walks towards us asking who took the shot. Our sniper confesses and the player walks to him to shake his hand to congratulate him for the excellent shot he took. That’s the spirit of airsoft right there everyone!

During this engagement with the help of adrenaline, the pain slowly fades away but kicks back in when we get back to camp. I take off my webbing and decide I will NOT carry that thing anymore the next day. Then I remember what I was told at the reconnaissance training; “chest rig, belt and a rucksack”. I take out my RACK from my kit bag and swap all the stuff from the harness to it. The essentials do fit but I still need a small rucksack. Having only my ALICE ruck with me (while really good, even the medium is quite large), I borrow one from the same guy who sold me the RACK, since he cannot carry a rucksack because of his shoulder. We discuss our mutual pains on our shoulders and about the RACK as well, sharing a few laughs about how plans never really come together the way you want them.

As I had learned, the ALICE harness worked well, for weekend games. Most likely with some lightening and adding a rucksack, it would work well for longer games as well. But with the current setup I had it with me, it just killed me shoulder. LBV would have worked better, but then again, it might have been too much. I was so glad that I took the RACK with me.

The next morning I setup the RACK, tightening the straps and everything. I placed my Blackhawk! dual pistol mag pouch on my trouser belt, as well as my Bianchi holster for my M1911. I ran these the same way at Blood Valley after Berget and noticed that while great, it is better to have a webbing belt for them. Since I have a few extra ones at my home bunker, I took one and added one ALICE mag pouch to it for small items along with a Blackhawk! bang pouch for grenades and what not. Have not tested this belt out with the RACK yet, but it feels good when posing. Then again, that does not necessarily mean anything.

I also modified the RACK a bit after Berget. I added one SDS canteen pouch and bought an extra Safariland accessory pouch for it so that I could put the other one back to my Safariland ELCS kit. I’ve also added some bicycle inner tire strips to the straps so I can run my camelback tube and radio wiring through them securely. These actually work really well and I recommend this mod! I use them on my other kit as well.

In addition, since I did not have a small daypack at all, I purchased one from, again, the same guy who sold me the RACK in the first place. Adding some custom foam padding to the back of the rucksack (the original was thin and when I got it, all folded up at the bottom of the pack) and secured it with some custom mods. The funny thing is, I bought “the same” pack from a shop/seller on ebay (which I will not name though I have had bad experiences with them in the past as well), taking a risk though I knew there had been some issues before as well, and I received the larger version of the rucksack. While the images on the listing were correct, the rucksack I received was the wrong one. It was the more expensive one so I was not going to complain, since I already had the smaller one lined up though my friend. Now I am just missing the largest pack of the set and I am squared away. I would have gotten the medium size eventually anyway, so no harm was basically done.

Now that my current favorite gear has been finished and what not, I just need to do some testing with it. So far I have tested individual items equipment and they seem to hold up really well and it is comfortable and light. I will try and see if I have any pictures of me with the Berget setup, Blood Valley setup and the current incarnation that I have yet to try out. Thanks for reading through everything and I hope this was at least remotely fun and informative to read. As always, here are some pics!11138149_10206472687717165_4215746964163608977_n 11412289_10206472690677239_4983640151854268173_n

Berget setup for the RACK and other kit seen as well. Could not locate better pictures but I’ll give you the short and sweet. From my POV, left hand side has Safariland ELCS M60/SAW 100rd pouch which was used for food and small items. Next up a tan buckled radio pouch (SDS Sabre Radio Pocket) for my radio, then three SDS R.A.C.K M4 Double Magazine pouches  (these are probably the best mag pouches I have ever had), one SDS MOLLE II, Pouch, Grenade, Hand, pouch which I ended up using for the platoon radio (Puxing 888, fits great!) I was tasked of carrying, and on the right hand, another Safariland ELCS M60/SAW 100rd pouch which held my canteen and canteen cup. In the upper picture you can also see the OD daypack I borrowed and of course, The Lawmaker, which is a custom made by Berget Events for me. Works like the real thing too. Liking it!

p1040667 copy

Here is the Blood Valley setup. Basically the same as the Berget setup, but daypack switched for a Camelback 3L hydration (need to get a woodland one…) and the left hand side Safariland pouch was changed to Pouch, General Purpose, Large, from the same manucafturer. I also added an SDS Medic Pocket (as it says on the tag) to the right side of my left hand M60/SAW 100rd pouch.

IMG_20150802_151840 IMG_20150802_152102

And finally, the current setup. Again from my POV when wearing the RACK, from the left hand side, Safariland Pouch, General Purpose, SDS Sabre Radio Pocket , three SDS R.A.C.K M4 Double Magazine pouches, SDS MOLLE II, Pouch, Grenade, Hand, US GI Carabiner with some OD 100mph tape, which holds two rolls of red/black electrical tape, SDS Medic Pocket and SDS 1QT Canteen/Utility pouch.

The belt is a standard ALICE webbing belt, with Blackhawk! Dual pistol mag pouch, ALICE M16 magazine pouch, Blackhawk! frag pouch and a Bianchi M12 holster.

The two rucksack are, left to right, The Protector Corp. Pack, Patrol, Combat and SDS Large Assault Pack. I think that the Patrol pack is the Air Force version, since it does not have the US stamped on the smaller front pocket. Both packs are to my liking and now I just need to get out with them to the field.

Thanks again for reading everyone and apologies for the shadows on the two last pictures.